01Laser Cutting
Profile cutting and metal blank preparation to drawing. Material, thickness and edge requirements should be defined from the outset.
02 / Capability systemThe right process.
The right process.
Clear technical requirements.
Does your part need cutting, stamping, welding or surface finishing? Nam Son reviews the drawing and intended use to assess the manufacturing route.
Explore processesNS / PRODUCTION MAP04 CAPABILITY GROUPS
01Laser CuttingPROFILE / BLANK PREPARATION
02StampingPIERCING / FORMING
03Robotic WeldingJOINING / CONSISTENCY
04Surface FinishingMACHINING / FINISHING
MATERIAL → GEOMETRY → APPLICATIONBUILD TO PRINT
Laser CuttingStampingRobotic WeldingMachining & Surface Finishing
Capability systemFour capability groups.
Four capability groups.
Reviewed part by part.
Alongside these four process groups, the factory has CNC, milling and turning equipment for tooling. Specialist metrology and die heat treatment are coordinated with external providers. Tolerances and capability must be confirmed for each drawing.
01
02Stamping
Creating holes, ribs and formed geometry. Tooling options are considered together with expected volume before the production approach is selected.
03Robotic Welding
Joining parts by robotic welding. Weld locations, fixtures and assembly requirements must be agreed.
04Machining & Surface Finishing
Finishing parts for their intended use. Surface requirements are discussed for each product.
ApproachFor a sound assessment,
For a sound assessment,
what information is needed?
Clear requirements help both sides identify what can proceed and what needs further discussion.
Material
State the material grade, thickness and any material-document requirements. No substitution is made without agreement.
Geometry
Provide a revision-controlled drawing with the necessary dimensions and tolerances. Mark assembly locations and critical characteristics.
Quantity
State the batch quantity, repeat demand and required date so the production approach can be reviewed.
Output
Agree surface requirements, measurement methods and handover documentation. Specialist metrology scope must be confirmed with the external inspection provider.
Connecting processesConsider the full route.
Consider the full route.
Before selecting a process.
Not every part requires every stage shown below. The process sequence is reviewed against the drawing, assembly points and finishing requirements.
01DrawingUnderstand requirements
02Prepare blankLaser cutting
03FormStamping
04JoinRobotic Welding
05FinishVerify output
Review a specific requirement
Where does the part need precision?
Identify the critical dimensions, tolerances and assembly requirements. This gives Nam Son the basis to assess capability before both sides agree the process route.